Konica Minolta DRYPRO Model 793 Operation Manual page 26

Ch.2 Product Outline
2-1-6 Supply Tray & Cutter
1) Shutter
2) Holding Plate
3) Winding Shaft
4) Cutter Pocket
1) Shutter
Protect the film from being exposed to
the external light.
2) Holding Plate
Press and hold the edge of the film
package when loading the film.
3) Winding Shaft
Wind the film package when it is loaded.
Next time when a new film package is
loaded, unwind and remove the previ-
ous film package before the new film
package is loaded.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
6) Side Stoppers
5) Cutter
4) Cutter Pocket
Holds the cutter.
5) Cutter
Use this cutter to cut the film package
when it is newly loaded.
6) Side Stopper
Replace the position of Side Stoppers
when the film size is changed.
< 24 >
Do not place anything
or lean on the Supply
Tray when it is pulled
out from the DRYPRO
793. It may cause dam-
age to the device.
Do not touch the shut-
ter knob, otherwise it
may cause an acciden-
tal exposure of the film.
p.35 Film Loading
p.42 Changing the
Film Size and
Film Type