Konica Minolta DRYPRO Model 793 Operation Manual page 67

Ch.4 Maintenance Mode
6
Calibration sheet will be printed upon termination of the Maintenance Mode.
However, in User Level 1 or 2 (Menu Mode), the calibration sheet will be printed
upon the registration of its print job.
Calibration sheet of the DRYPRO 793 is designed for collection of the data that is to be
used for the automatic density correction.
For users to check and control the density, use SMPTE pattern that can be printed using
the "Test Print" of the Maintenance Mode.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
6
Touch the [YES] button.
- Registers the print job for the calibration sheet, and
returns to the "Maintenance Mode (PRINT SETUP)"
screen.
- Touching the [RETURN] button will return to the "Main-
tenance Mode (PRINT SETUP)" screen without print-
ing the calibration sheet.
< 65 >
p.62 TEST PRINT