Konica Minolta DRYPRO Model 793 Operation Manual page 55

Ch.4 Maintenance Mode
When a Web user is logging in the DRYPRO 793, a user cannot enter the
Maintenance Mode.
When the printing operation is specified by "PREVIOUS PRINT", "TEST PRINT",
"CALIBRATION" or "MAMMO QC PRINT", print operation of these print data starts
when the Maintenance Mode is shut down.
Following buttons will be displayed on the
"USER SELECT" screen 3/3.
[USER LV2]
[USER LV3]
[SERVICE]
Touching the [RETURN] button after manipu-
lating on the screen for the change of
DRYPRO 793 settings, a message confirming
to save the setting will appear.
Selecting [YES] : Saves the altered settings,
Selecting [NO] : Returns to the Maintenance
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
5
Touch the [OK] button.
- "Maintenance Mode" screen will be displayed when the
input password is correct.
- A message indicating that the password is wrong if the
input password is not correct. Input the correct pass-
word.
- When a Web user is accessing the DRYPRO 793, a
5
message indicating that the setting cannot be manipu-
lated even the input password is correct.
: Buttons that can be
shared by the user of the
User Level 2.
: Buttons that can be
shared by the user of the
User Level 3.
: Buttons exclusively for the
use by service engineer.
Users cannot touch it.
and returns to the
Maintenance Mode screen.
Mode screen without saving
the altered settings.
Ex) Touching the [YES] on the
"PRINT CONDITION" screen.
< 53 >