Konica Minolta DRYPRO Model 793 Operation Manual page 39

Ch.3 Operation
9
Do not touch the Shutter Knob. Otherwise
it may cause accidental exposure of the
film.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
8
Remove the seal, and open the front and back
edges of the package.
9
Touch the [NEXT] button on the Operation
Panel.
- An animation showing how to load the film package
(shutter close ~ cutting the light-proof package) will be
displayed.
10
Insert the rear edge of the package into the gap
between the Pressure Plate and the Winding
Shaft.
11
Tightly close the Shutter so that the front edge of
the Package protrudes from the Shutter.
12
Take out the Cutter from the Cutter Pocket. (1 in
the left fig.)
13
Cut the front edge of the package that is pro-
truding from the tray using the Cutter. (2 in the left
fig.)
< 37 >
An animation of "Shutter
close ~ cutting the light-
proof package)