Konica Minolta DRYPRO Model 793 Operation Manual page 132

Ch.6 Troubleshooting
Do not touch the Deodorant Filter Housing
(yellow) when pulling out the Deodorant Filter
Case. It may be heated 100: or higher, and
you may get burned.
Do not touch the HPRO Unit when removing
the jam film. It may be heated 100: or higher,
and you may get burned.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
4
Pull out the Deodorant Filter Case.
- Hold and slightly lift the handle (green) at the front of
the Deodorant Filter Case by your left hand, and pull it.
- Hold the handle (green) at the top of the Deodorant Fil-
ter Case by your right hand, and pull it out.
5
When the leading edge of the jam film can be
located, insert your hand, and remove the jam
film.
- If the leading edge of the jam film cannot be located by
being caught between the rollers, proceed to the step
6.
6
Insert your hand, and send the jam film toward
the transport section.
< 130 >
Animation of jam
release in the Cooling
Unit.