Konica Minolta DRYPRO Model 793 Operation Manual page 56

Ch.4 Maintenance Mode
4-3-2 Switching to the Maintenance Mode
How to switch to and operate the Maintenance Mode is detailed below.
3
When a WEB user is logging in the DRYPRO 793, a user cannot enter the
Maintenance Mode.
When the printing operation is specified by "Reprint", "Test Print", "Calibration" or
"Mammo QC print", print operation of these print data starts when the Maintenance
Mode is shut down.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
(without using the user level classification)
1
Switch to the Menu Mode.
- "MENU MODE" screen will be displayed.
2
Touch the [Maintenance] button.
- Confirmation message will appear.
2
3
Touch the [YES] button.
- Switches to the "Maintenance Mode" screen.
- Touch the [NO] button to return to the "Menu" screen.
- [Password] button is exclusively for the use by the service
engineer. Users cannot touch it.
< 54 >
p.50 Switching to
the Menu
Mode