Konica Minolta DRYPRO Model 793 Operation Manual page 47

Ch.3 Operation
Whenever the film size or film type is changed, make sure to process an exposed film
(dummy) before processing the film for actual diagnosis, and check that problems
such as following are not observed.
- Film jam occurs
- Printed image has some artifacts : May have failed to set the correct film type.
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
13
Follow the step 8 onward of the "Film Loading",
and load the film package.
: May have failed to set the correct film size.
< 45 >
p.35 Film Loading