If An Error Has Been Displayed During Scanning - Konica Minolta AccurioPress C2070 Quick Manual

7.4

If an Error has been Displayed during Scanning

7.4 If an Error has been Displayed during Scanning
If you cannot send data, [Error] is displayed in [Send History] on the [JOB LIST] screen.
Check the free space on the HDD (image controller area).
1
Start the Web browser.
2
Enter the IP address of the image controller in the address bar, and then press [Enter].
The user mode screen of PageScope Web Connection is displayed.
% For details, refer to the [HTML User's Guide].
3
Click [Device Information], and then click [Option].
4
Check [Remain] in [HDD (Pre-RIP/Form/Scan Data)].
% To delete unnecessary scan data, use an HDD TWAIN driver. For details, refer to the user's guide
for the HDD TWAIN driver.
% Automatically delete scan data that are stored in the HDD (image controller area) after the specified
time period has elapsed.
For details, refer to the [HTML User's Guide].
For information about the default administrator password, refer to page 7-17.
% Lower the data resolution.
Note that the image quality may be degraded. For details, refer to the [HTML User's Guide].
% Reduce the number of pages.
Divide the originals, or remove pages unnecessary to scan.
AccurioPress C2070series
7
7-16