Mercury 40 Service Manual page 478

3. With lip of ribbed neoprene O.D. seal facing towards small shoulder of Mandrel
(91-825197), press seal into carrier until mandrel bottoms on carrier.
a -
b -
NOTE: Apply a light coat of 2-4-C w/Teflon (92-850736A1) to the lips of both seals after
installation in carrier.
4. Apply a light coat of 2-4-C w/Teflon to the new O-ring and install on carrier.
a -
90-828631R3 MARCH 1999
b
91-825197
Seal (Ribbed Neoprene) Lip Facing Up
Mandrel (91-825197)
95
95 2-4-C w/Teflon (92-850736A1)
O-ring
NON-BIGFOOT GEAR HOUSING
a
52853
a
52825
Page 6A-23