Mercury 40 Service Manual page 411

3. Position trim cylinder assembly (bottom first) between clamp brackets.
4. Apply 2-4-C Marine Lubricant to lower pivot pin. Using a suitable punch, drive lower
pivot pin into clamp bracket and trim cylinder assembly until pivot pin is flush with out-
side surface.
a
2-4-C w/Teflon (92-850736A1)
95
a -
b -
5. Using a suitable punch, drive lower dowel pin into its hole until seated.
6. Apply 2-4-C Marine Lubricant to surface of upper pivot pin, pivot pin bore and trim ram
bore.
2-4-C w/Teflon (92-850736A1)
95
a -
b -
c -
d -
90-828631R3 MARCH 1999
Trim Cylinder Assembly
Lower Pivot Pin
a
Lower Dowel Pin
Pivot Pin
Pivot Pin Bore
Trim Ram Bore
55467
c
95
51148
POWER TRIM
95
b
51147
b
d
51148
Page 5C-49