Mercury 40 Service Manual page 285

CYLINDER BLOCK/CRANKCASE
2. Reconnect the vent hose. Use sta-strap to fasten hose connections.
a -
3. Engage the vertical shift shaft.
4. Reconnect the power trim harness wires.
5. Position the trim wiring harness away from the moving horizontal shift shaft. Fasten har-
ness to mounting boss with sta-strap as shown.
a -
b -
c -
d -
Page 4B-44
a
Vent Hose
c
d
Engage Vertical Shift Shaft and Close the Latch
Power Trim Harness Wires
Use Sta-strap to Fasten Wiring Harness Away from the Moving Horizontal Shift
Shaft
Horizontal Shift Shaft
b
a
90-828631R3 MARCH 1999
53726
53859