Mercury 40 Service Manual page 595

16. Route the longer throttle cable behind the cable bracket as shown.
17. Insert the anchor into the anchor hole on the throttle cable.
18. Place the throttle cable into the notch in the cable bracket.
b
a -
b -
19. Adjust the throttle cables as follows:
a. Position the throttle grip to idle position.
b. Move the throttle linkage arm down.
a -
90-828631R3 MARCH 1999
a
Longer Throttle Cable (Position Behind Cable Bracket as Shown)
Cable Must be able to Rotate in Slot
Throttle Linkage Arm
TILLER HANDLE
54284
a
Page 7B-19