Throttle Cable Installation - Mercury 40 Service Manual

Throttle Cable Installation

NOTE: Attach Shift cable to engine prior to attaching throttle cable.
1. Position the remote control handle into neutral detent.
2. Fit the throttle cable thru the front rubber grommet and into the bottom cowl.
3. Install the throttle cable to the throttle lever with retainer pin. Lock retainer pin in place.
a -
b -
4. Move the throttle linkage arm down.
a -
90-828631R3 MARCH 1999
b
Throttle Cable
Retainer Pin
Throttle Linkage
a
a
THROTTLE/SHIFT LINKAGE
Page 7A-7