Power Trim Disassembly - Mercury 40 Service Manual

POWER TRIM
6. Use suitable punch to remove (Drive Down) lower pin. Retain dowel pin.
7. Use suitable punch to drive out lower pivot pin.
a
a -
b -

Power Trim Disassembly

IMPORTANT: Power trim system is pressurized. Trim rod must be in the full "UP"
position (fully extended) prior to fill/drain plug, or manual release valve removal.
1. Remove reservoir cap.
2. Remove manual release valve assembly to drain oil.
a -
b -
Page 5C-30
Dowel Pin
Lower Pivot Pin
Reservoir Cap
Manual Release Valve
b
51144
a
b
55263
51144
90-828631R3 MARCH 1999