Bearing Carrier Reassembly - Mercury 40 Service Manual

Bearing Carrier Reassembly

1. Lubricate O.D. of bearing and bearing carrier bore with Quicksilver 2-4-C w/Teflon.
2. Protect lip on forward side of bearing carrier, using bearing installation tool (91-13945).
3. Press propeller shaft needle bearing (number side toward mandrel 91-15755) into
carrier, until bearing bottoms out.
2-4-C w/Teflon (92-850736A1)
95
a -
b -
c -
90-828631R3 MARCH 1999
95
a
91-13945
Bearing Installation Tool (91-13945)
Mandrel (91-15755)
Suitable Driver Rod
BIGFOOT GEAR HOUSING
c
b
91-15755
21042
Page 6B-33