Manual Tilt System Installation - Mercury 40 Service Manual

MANUAL TILT ASSIST
11. With cam lever remaining open (facing down), remove tilt assembly from oil and secure
in soft jawed vise. Torque accumulator to specified torque.

Manual Tilt System Installation

1. Apply 2-4-C Marine Lubricant to lower pivot pin hole and pivot pin surface.
2. Start lower pivot pin into pivot pin hole and position lower dowel pin (retained) in its hole.
3. Reinstall manual tilt system, bottom first. Reconnect release valve link rod.
a
95
95
a -
b -
c -
Page 5D-40
Accumulator Torque
35 lb-ft (47 Nm)
b
2-4-C w/Teflon (92-850736A1)
Lower Pivot Pin
Lower Dowel Pin
Manual Tilt System
51148
50433
2
c
1
90-828631R3 MARCH 1999
51144