Trim Limit Assembly Installation; Manual Release Valve Installation - Mercury 40 Service Manual

POWER TRIM

Trim Limit Assembly Installation

1. Lubricate all O-rings. Install spring, poppet, spool housing and trim limit spool into
manifold.
NOTE: There are three different size springs used in this manifold. The heavy spring is used
on 75-125 hp outboards. The medium spring is used on 40-60 hp Bigfoot outboards. The
light spring is used on 30-60 hp outboards.
a -
b -
c -
d -

Manual Release Valve Installation

1. Install "E" clip (if removed) and lubricate O-rings to manual release valve.
2. Install manual release valve assembly into manifold.
a -
b -
c -
Page 5C-44
or or
Spring
Poppet
Spool Housing
Trim Limit Spool
Manifold
Manual Release Valve
E Clip
a
b
c
d
51008
a
c
b
90-828631R3 MARCH 1999