Power Trim System Removal - Mercury 40 Service Manual

Power Trim System Removal

1. Tilt outboard to the full up position and support with tilt lock pin.
2. Disconnect the power trim wire harness and remove clamp.
a
a -
b -
c -
3. Remove the trilobe pin.
4. Drive out the upper pivot pin.
5. Remove the sacrificial anode.
a -
b -
c -
90-828631R3 MARCH 1999
Tilt Lock Pin
Power Trim Wire Harness Clamp
Harness
Trilobe Pin
Upper Pivot Pin
Sacrificial Anode
55464
a
b
c
POWER TRIM
b
c
55264
55331
Page 5C-29