Mercury 40 Service Manual page 592

TILLER HANDLE
7. Install tiller handle assembly.
8. Pry up the left side lower corner of the rubber grommet in order to fit the wiring in the
lower opening.
9. Connect the auxiliary harness. Refer to wiring diagram on next page.
10. Bundle all the wiring connections and fasten together with a sta-strap.
d
c
a -
b -
c -
d -
e -
Page 7B-16
f
a
Screw (2)
Tab Washer, Lock - Bend Tabs Against the Screw Heads
Rubber Grommet
Throttle Cables
Auxiliary Harness
f - Sta-Strap
Tiller Handle Screw Torque
32 lb-ft (43.4 Nm)
e
b
54272
90-828631R3 MARCH 1999