MANUAL TILT ASSIST
Valve Block Removal
1. Remove two screws from the shock rod cylinder to separate the valve block.
2. Remove O-rings and dowel pins.
b
a -
b -
c -
d -
e -
Memory Piston Removal
1. Remove memory piston from cylinder using one of two methods:
a. Using lock ring pliers P/N SRP-4 (Snap-On) or suitable tool.
Page 5D-24
c
Screw
Valve Block
Shock Rod Cylinder
O-ring (2)
Dowel Pin (2)
e
a a
a
51146
SRP-4 (Snap-On)
d
51148
90-828631R3 MARCH 1999