TILLER HANDLE
9. Place pulley assembly into arm.
10. Slide the tiller tube into the arm. Position the throttle lock knob into its slot.
11. Match the end of the tiller tube with the slots in the pulley assembly. Insert the tiller tube
end into the pulley assembly.
12. Secure tiller tube with retainer.
13. Snap the engine start switch on the tiller tube.
a -
b -
c -
d -
14. Place bushing components on the arm mounts.
95
a -
b -
c -
d -
Page 7B-10
d
a
Pulley Assembly
Throttle Lock Knob
Retainer
Screw-M5x16
Tiller Tube Retainer Screw Torque
35 lb-in. (3.9 Nm)
2-4-C w/Teflon (92-850736A1)
Flat Washer
Bushing
Wave Washer (2)
Bushing
c
b
95
95
c
b
a
d
90-828631R3 MARCH 1999