Shock Rod Removal; Shock Rod Disassembly - Mercury 40 Service Manual

Shock Rod Removal

1. Unscrew cylinder end cap assembly using spanner wrench [1/4 in. x 5/16 in. long pegs].
2. Remove shock rod assembly from cylinder.
91-74951

Shock Rod Disassembly

NOTE: The only serviceable items on the shock rod assembly are the O-rings and wiper
ring. If shock rod requires any other repair, replace shock rod assembly.
a -
b -
c -
1. Place shock rod assembly on clean work surface.
2. Remove three (3) screws and remove plate from shock rod piston.
a -
b -
c -
90-828631R3 MARCH 1999
a
End Cap
O-ring (2)
Wiper Ring
Screw (3)
Plate
Shock Rod Piston
51145
c
b
a
b
c
51143
MANUAL TILT ASSIST
Page 5D-21