13.29
Checking the chain, rear sprocket, engine sprocket, and chain guide
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the protection cap. (
–
Raise the motorcycle with a lift stand. (
Main work
–
Check the chain, rear sprocket and engine sprocket for wear.
»
If the chain, rear sprocket or engine sprocket is worn:
–
Change the drivetrain kit.
400227-01
–
Pull on the top section of the chain with the specified
A
weight
.
Guideline
Weight, chain wear measure-
ment
–
Measure distance
section.
Info
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
Maximum distance
18 chain rollers at the
longest chain section
»
If distance
–
Change the drivetrain kit.
400987-10
SERVICE WORK ON THE CHASSIS 13
p. 43)
p. 69)
p. 107)
p. 71)
Info
The engine sprocket, rear sprocket and chain
should always be replaced together.
10 ... 15 kg (22 ... 33 lb.)
B
of 18 chain rollers in the lower chain
272 mm (10.71 in)
B
from
B
is greater than the specified measurement:
Info
The engine sprocket, rear sprocket and chain
should always be replaced together.
p. 57)
75