Display Warning Message About Output Settings - Xerox DocuColor 2240 User Manual

U G ( P )
S E R U I D E R I N T
Delayed Print
User ID
Password
Retrieve Document Name
Document Name
Start Print Time
2 – 1 6
Select when you want to output delayed prints.
Displays the User ID for Job Type. The User ID displayed is the
User ID specified on the Configuration tab. This option can only be
selected when the setting on the Configuration tab has been
completed. This is a display-only item and cannot be changed in
User ID.
Displays the Job Type password specified in the Configuration
tab. Each digit entered is displayed as an asterisk (*). This option
can only be selected when the setting on the Configuration tab
has been completed. This is a display-only item and cannot be
changed in Password.
Select the method of specifying the document name. If you have
selected Auto Retrieve, the valid document name can be up to 24
alphanumeric characters.
When "Enter Document Name" is selected in the Stored
Document Name list, you can specify a document name with a
maximum of 24 alphanumeric characters.
Set the time that you want Delayed Print to be carried out. Place
the cursor in the hour or minute box and press the up or down
triangle to specify the starting time. You can also set the time by
entering the time directly into the boxes.
• The default setting is 00:00

Display warning message about Output Settings

When printing, the print driver checks whether Output Size setting
conflicts with other settings.
• When this function is activated, a conflict dialog box is
displayed when a non-conformity during printing. Check
the content of the dialog box in order to resolve the
conflicting function to continue printing.
• When this function is inactive, no conflict dialog box is
displayed, but the conflicting setting is automatically
resolved and printing continues.