Physical Connection - Xerox WorkCentre 7120 System Administrator Manual
Hide thumbs
Also See for WorkCentre 7120:
- Benutzerhandbuch (240 pages) ,
- Manual d'utilisation (238 pages) ,
- User manual (234 pages)
Advertisement
Initial Setup
Physical Connection
To connect your printer:
1.
Connect the power cable to the printer, and plug it into an electrical outlet.
2.
Connect one end of a Category 5 or better Ethernet cable to the Ethernet port in the back of the
printer. Connect the other end of the cable to a correctly configured network port.
3.
If you have purchased and installed the Fax Hardware Kit, connect the printer to a correctly
configured telephone line.
4.
Turn the printer on.
14
WorkCentre 7120 Multifunction Printer
System Administrator Guide
Advertisement
