3
Lift the staple guard, and then remove any jammed or loose staples.
4
Press down the staple guard until it clicks into place.
5
Insert stapler cartridge back into the finisher until it clicks into place.
6
Close the staple access door.
7
If necessary, touch Done from the printer control panel to clear the
message and continue printing.
[x]-page jam, remove all pages from the
finisher's accumulator. Leave paper in
bin. [45y.xx]
Paper jam in the finisher bin
1
Empty the standard bin.
24
2
Move the tamper arms to the sides.
3
Remove all jammed pages from inside the access areas.
Note: Make sure all paper fragments are removed.
4
If necessary, touch Done from the printer control panel to clear the
message and continue printing.