Configuration Menu; Entering Configuration Mode; Reset Adf Maintenance Kit Counter; Maintenance Counter Value - Lexmark MX610 Service Manual

Configuration menu

The Configuration menu group consists of menus, settings, and operations that are used to configure a printer for
operation.

Entering configuration mode

The Configuration Menu group contains a set of menus, settings, and operations which are infrequently required by a
user. Generally, the options made available in this menu group are used to configure a printer for operation.
1
Turn off the printer.
2
Press and hold the 2 and 6 buttons simultaneously.
3
Turn on the printer.
4
Release the buttons after 10 seconds.

Reset ADF Maintenance Kit Counter

After scheduled maintenance, the ADF maintenance count value must be reset to zero.
To reset the maintenance count value to zero:
1
From the Configuration menu, navigate to Reset ADF Maintenance Kit Counter.
2
Touch reset separator roll and pick assembly counter. Resetting displays.
3
Touch back to exit.

Maintenance Counter Value

When this is selected, the printer displays the current value for the maintenance kit counter. This counter tracks printer
usage. A print job containing a single page increments the counter by one, while a duplex print job increments the
counter by two. When the value has reached the rated life of the maintenance kit, it reminds the user that scheduled
maintenance is required. See
is installed.
To view the maintenance counter value:
1
From the Configuration menu, navigate to Maintenance Counter Value.
The value is displayed and cannot be changed.
2
Press Back or X to return to the Configuration menu.

Reset Maintenance Counter

After installing the maintenance kit, the maintenance counter must be reset.
To reset the maintenance counter:
1
From the Configuration menu, navigate to Reset Maintenance Counter.
2
Depending on the printer model, press OK or touch
the counter.
"Maintenance kits" on page
Service menus
380. The counter must be reset after the maintenance kit
to reset the counter, or press X to exit without resetting
186
7016