Heart Rate Alert; User Profile - Oregon Scientific SE212 User Manual

HEART RATE ALERT

You can set the heart rate alert in the exercise profile to the
following settings:
ICON
When the heart rate alert is activated, a flashing down or up arrow will
appear on the display to show which heart rate limit you have surpassed.
NOTE Using the vibration feature consumes battery life at a faster
rate than the sound alarm.
NOTE
If the watch is kept idle without receiving a heart rate signal
for 5 minutes, the Heart Rate Mode will quit and return to Clock Mode.

USER PROFILE

To access the full benefits of the VIBRA Trainer Elite / VIBRA
Trainer Elite Pro watch, set up your user profile before you exercise.
This will automatically generate a fitness index and body mass
index (BMI - VIBRA Trainer Elite Pro only). These calculations
along with the calorie and fat % burned will help you track your
progress over time.
To set the user profile:
1. Press MODE to navigate to User Profile Mode.
DESCRIPTION
Heart rate sound and vibration alert are OFF
Heart rate sound alert is ON
• 1 beep means you have gone below
your lower zone limit
• 2 beeps means you have gone above
your upper zone limit
Heart rate vibration alert is ON
Heart rate sound and vibration alert are ON
21