Heart Rate Alert - Oregon Scientific SE102 User Manual

To manually calculate your own heart rate limits:
MHR
LOWER LIMIT
UPPER LIMIT

HEART RATE ALERT

You can set the heart rate alert in the heart rate mode to the
following settings:
ICON
or flash when you have surpassed your heart rate limit.
NOTE
If the watch is kept idle without receiving a heart
rate signal for 5 minutes, the heart rate mode will quit and
return to clock mode.
*
for SE102 only
MHR = 220-age
MHR x lower target activity %.
E.g. Target activity is WALK:
Lower limit = MHR x 65%
MHR x upper target activity %.
E.g. Target activity is WALK:
Upper limit = MHR x 78%
DESCRIPTION
*
Heart rate sound and vibration alert
are OFF
Heart rate sound alert is ON
• 1 beep = you have gone below your
lower zone limit
• 2 beeps = you have gone above your
upper zone limit
*
Heart rate vibration alert is ON
*
Heart rate sound and vibration alert
are ON
14