Utility-Message File Transfer Pbx To Pc; Utility-Error Log - Panasonic KX-TDA50 Pc Programming Manual

This option is only available at Installer level, and requires that at least 1 MSG/ESVM card is installed.
For the KX-TDA100/KX-TDA200/KX-TDA600, the OPB card that it is mounted on must be set to OUS
status. For the KX-TDA50, the MSG card must be set to OUS status.
Files are stored on the MSG/ESVM card in the location specified by the file's header information.
Uploaded files are automatically renamed as necessary. If this location already contains an OGM, it
will be overwritten by the newly uploaded message.
To transfer OGMs to an MSG/ESVM card
1.
From the Utility menu, select Message File Transfer PC to PBX.
2.
Select the target MSG/ESVM card, or "ALL", from the drop-down list, and click OK.
The Open dialog box will be displayed.
3.
Select the message files to upload.
It is possible to select multiple files.
4.
Click OK.
The files will be uploaded. Files that do not contain message data will be ignored.
When complete, the display will return to the main screen.
2.6.7 Utility—Message File Transfer PBX to PC
Transfers Outgoing Message (OGM) files from the MSG/ESVM card to the PC.
This option is only available at Installer level, and requires that at least 1 MSG/ESVM card is installed.
For the KX-TDA100/KX-TDA200/KX-TDA600, the OPB card that it is mounted on must be set to OUS
status. For the KX-TDA50, the MSG card must be set to OUS status.
To transfer OGMs to the PC
1.
From the Utility menu, select Message File Transfer PBX to PC.
2.
From the upper drop-down list, select the target MSG/ESVM card.
3.
From the lower drop-down list, select the messages to transfer.
• To transfer a certain message, select the number of that message.
• To transfer all messages at once, select "ALL".
The Save dialog box will be displayed.
4.
Enter a file name.
5.
Click Save.
6.
Click OK.
When you choose to transfer all messages, each message is saved as an individual file, with a
number appended to the file name corresponding to that message's location on the MSG/ESVM
card.
When complete, the display will return to the main screen.
2.6.8 Utility—Error Log
Collects and displays system error information.
Whenever there is a system failure, the PBX stores the error code generated. The connected PC
collects all of these codes, along with other information, and displays an explanatory error message.
2.6 Utility
PC Programming Manual 55