Utility-Message File Transfer Pbx To Pc; Utility-Error Log - Panasonic KX-TDA50 Programming Manual

2.5 Utility
To transfer OGMs to an MSG card
1.
From the Utility menu, select Message File Transfer PC to PBX.
2.
Select the target MSG card from the drop-down list, and click OK.
The Open dialog box will be displayed.
3.
Select the message files to upload.
It is possible to select multiple files.
4.
Click OK.
The files will be uploaded. Files that do not contain message data will be ignored.
When complete, the display will return to the main screen.
2.5.7 Utility—Message File Transfer PBX to PC
Transfers Outgoing Message (OGM) files from the MSG card to the PC.
This option is only available at Installer level, and requires that at least 1 MSG card is installed. For
the KX-TDA100/KX-TDA200/KX-TDA600, the OPB card that it is mounted on must be set to OUS
status. For the KX-TDA50, the MSG card must be set to OUS status.
To transfer OGMs to the PC
1.
From the Utility menu, select Message File Transfer PBX to PC.
2.
From the upper drop-down list, select the target MSG card.
3.
From the lower drop-down list, select the messages to transfer.
• To transfer a certain message, select the number of that message.
• To transfer all messages at once, select "ALL".
The Save dialog box will be displayed.
4.
Enter a file name.
5.
Click Save.
6.
Click OK.
When you choose to transfer all messages, each message is saved as an individual file, with a
number appended to the file name corresponding to that message's location on the MSG card.
When complete, the display will return to the main screen.
2.5.8 Utility—Error Log
Collects and displays system error information.
Whenever there is a system failure, the PBX stores the error code generated. The connected PC
collects all of these codes, along with other information, and displays an explanatory error message.
The functions of the buttons on this screen are as follows:
Button
Cancel
Capture
56 PC Programming Manual
Function
Closes the Error Log screen without saving.
Saves the currently displayed Error Log information as a text file.