Panasonic KX-TDA50 Pc Programming Manual page 78

2.8 [1] Configuration
3.
Click Yes to confirm.
The card will be removed.
To change the status (INS/OUS) of a card (Interactive mode only)
1.
Move the mouse pointer over the card.
A menu will be shown under the mouse pointer.
2.
Select the desired status:
• Click INS to set the card to in-service status.
• Click OUS to set the card to out-of-service status.
To install an option card on an OPB3 card
1.
Move the mouse pointer over the card.
A menu will be shown under the mouse pointer.
2.
Select Option Card.
The OPB3 Option Card Setup screen will be displayed. See 2.8.27 [1-1] Slot—OPB3 Option
Card Setup (KX-TDA100/KX-TDA200/KX-TDA600 only).
Supported Card Types
KX-TDA50
Card
MPR: Main Processing Card
DHLC4: Pre-installed Super Hybrid
Ports
DLC4: 4-Port Digital Extension Card
HLC4: 4-Port Hybrid Extension Card
PLC4: 4-Port Proprietary Extension
Card
SLC4: 4-Port Single Line Telephone
Extension Card
LCOT4: 4-Port Analog CO Line Card
DLC8: 8-Port Digital Extension Card
PLC8: 8-Port Proprietary Extension
Card
SLC8: 8-Port Single Line Telephone
Extension Card
IP-GW4: 4-Channel VoIP Gateway
Card
IP-EXT4: 4-Channel VoIP Extension
Card
78 PC Programming Manual
Maximum Supported Slot
Quantity Numbers
1 00
1 01
1
02–04 (Type A
Slots)
3
2
05–07 (Type B
Slots)
1
1
Card Programming
2.8.3 [1-1] Slot—Card Property - MPR
2.8.4 [1-1] Slot—Card Property -
Extension Type
2.8.10 [1-1] Slot—Card Property - LCO
type
2.8.4 [1-1] Slot—Card Property -
Extension Type
2.8.19 [1-1] Slot—Card Property - IP
Gateway
2.8.22 [1-1] Slot—Card Property - IP
Extension