Display Options; Extension Number Setting - Panasonic KX-TDA50 Pc Programming Manual

2.1 Introduction
• "Out of service" means that the card is installed correctly in the PBX, but has been
temporarily removed from use. This allows settings to be modified or software to be
upgraded.
• "Fault" means that the card is not installed in the PBX correctly, or is not functioning correctly.
For more information, see the Installation Manual.
For details about how to change the status of a card, see To change the status (INS/OUS) of a card
(Interactive mode only) on screen 2.8.1 [1-1] Slot.
2.1.5

Display Options

The View and Window menus provide options to control the display of items within the Maintenance
Console.
• View
– Toolbar: Displays or hides the tool bar of commonly used buttons.
– Statusbar: Displays or hides the bar at the bottom of the Maintenance Console window.
– System Menu: Displays or hides the menu of PBX setting screens.
• Window
– Cascade: When multiple data screens are open, displays all open screens overlapped, with
the title bars visible.
– Tile(Horz): When multiple data screens are open, displays all open screens side by side.
– Tile(Vert): When multiple data screens are open, displays all open screens vertically.
2.1.6

Extension Number Setting

Many screens within the Maintenance Console software allow you to select extensions as part of
programming various features (for example, as members of a group). These screens use a standard
window to make selecting multiple extensions easy, accessed by clicking a button. This section
explains how to use this Extension Number Setting window.
To select multiple extension numbers, select the type of extension to display, highlight the extensions
you wish to add, then click the Add button. When finished, click OK. Data for the selected extensions
will be added to the first free spaces on the original screen.
Extension Type
Selects the types of extension numbers to display in Extension Numbers & Names List. Multiple
items can be selected. Items that are not available are shown with a grey checkbox.
Default
None selected.
Value Range
Wired Extension, Portable Station, VM Group(DPT), VM Group(DTMF), ICD Group, PS Ring Group,
OGM(DISA), External Pager, Analog MODEM
28 PC Programming Manual