Panasonic KX-TDA50 Pc Programming Manual page 122

2.8 [1] Configuration
ISDN CO / QSIG Master / QSIG Slave—T202
Specifies the maximum time that the PBX waits for a reply after resending the request to use an ISDN
line as a TIE line.
Default
20 × 100 ms
Value Range
0–600 × 100 ms
Maintenance Console Location
2.8.13 [1-1] Slot—Card Property - PRI type (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.13.13 PRIVATE NETWORK FEATURES
ISDN CO / QSIG Master / QSIG Slave—T203
Specifies the length of time to detect no communication status of L2.
Default
100 × 100 ms
Value Range
0–600 × 100 ms
Maintenance Console Location
2.8.13 [1-1] Slot—Card Property - PRI type (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
ISDN CO / QSIG Master / QSIG Slave—T301
Specifies the maximum time that the PBX waits for a reply after making a call to ISDN.
Default
0 × 100 ms
Value Range
0–18000 × 100 ms
122 PC Programming Manual