3-1-4] Dialing Plan - Panasonic KX-TDA50 Pc Programming Manual

Feature Manual References
1.3.1 Caller ID
Added Number
Specifies the number to be added to the incoming caller's number in the place of the removed digits
for each type of network numbering plan.
Default
International: 011
National: 1
Subscriber: Not stored.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.10.3 [3-1-3] Caller ID Modification
Programming Manual References
2.8.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Calling
Party number—Type of Number—Public, Private
2.8.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Called Party
number—Type of Number—Public, Private
Feature Manual References
1.3.1 Caller ID

2.10.4 [3-1-4] Dialing Plan

The PBX sends all of the dialed digits at once after an extension user completes dialing. The PBX
can recognize the end of dialing when the dialed telephone number starts with the programmed
leading number and contains the programmed total number of digits.
When the PBX recognizes the end of dialing to an analog CO line, the PBX cancels the muting of the
caller's voice sent to the analog CO line immediately. If the PBX cannot recognize the end of dialing,
the PBX mutes the caller's voice sent to an analog CO line from the time at which the last digit is
dialed until the analog CO line inter-digit timer expires.
4 tables can be programmed, each with a maximum of 50 leading numbers. Select the table to
program from the Dialing Plan Table list.
To assign a set of leading numbers automatically, click Auto Assign.
Leading Number
Specifies the leading number to be regarded as the beginning of dialing.
Default
No. 1 in Dialing Plan Table 1: N11
No. 2 in Dialing Plan Table 1: NXX NXX XXXX
2.10 [3] Group
PC Programming Manual 353