Panasonic KX-TDA50 Pc Programming Manual page 128

2.8 [1] Configuration
Feature Manual References
None
ISDN CO / QSIG Master / QSIG Slave—T3D3
Specifies the length of time that the PBX tries to establish L2 in "Permanent" mode.
Default
100 × 100 ms
Value Range
0–3000 × 100 ms
Maintenance Console Location
2.8.13 [1-1] Slot—Card Property - PRI type (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
ISDN CO / QSIG Master / QSIG Slave—T3D9
Specifies the length of time that the PBX tries to disconnect L2 in "Call by Call" mode.
Default
200 × 100 ms
Value Range
0–3000 × 100 ms
Maintenance Console Location
2.8.13 [1-1] Slot—Card Property - PRI type (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
ISDN Extension—T200
Specifies the maximum time that the PBX waits for a reply after sending the L2 command to ISDN.
Default
10 × 100 ms
128 PC Programming Manual