Panasonic KX-TDA50 Pc Programming Manual page 169

Flash—Flash Width (TIE)
Specifies the maximum length of a flash signal received from a TIE line that the PBX can recognize
as a hookswitch flash signal.
Default
800 ms
Value Range
8 × n (n=3–191) ms
Maintenance Console Location
2.8.16 [1-1] Slot—Card Property - T1 type (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
Caller ID—Caller ID Start Code
Selects the DTMF code used to detect the beginning of a Caller ID series.
Default
*
Value Range
*, #, A–D
Maintenance Console Location
2.8.16 [1-1] Slot—Card Property - T1 type (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Caller ID—Caller ID Information End Code
Selects the delimiter used to separate multiple parameters in a Caller ID series.
Default
*
Value Range
*, #, A–D
2.8 [1] Configuration
PC Programming Manual 169