1-1] Slot-Card Property - Ip Gateway - Panasonic KX-TDA50 Pc Programming Manual

2.8 [1] Configuration
Maintenance Console Location
2.8.18 [1-1] Slot—Port Property - T1 Port—Connection Command (KX-TDA100/KX-TDA200/KX-
TDA600 only)
Programming Manual References
2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
None
OUS
Takes the channel out of service. This enables a temporary non-use of the port, for example, for the
purpose of repair.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.8.18 [1-1] Slot—Port Property - T1 Port—Connection Command (KX-TDA100/KX-TDA200/KX-
TDA600 only)
Programming Manual References
2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
None
2.8.19 [1-1] Slot—Card Property - IP Gateway
The properties of the VoIP Gateway card can be specified.
En-bloc Dialing Setting
Selects the call dialing mode.
Default
Overlap
Value Range
En-bloc: The PBX sends all of the dialed digits at once after the extension user completes dialing.
The PBX recognizes the end of dialing when (1) # is dialed, if programmed, (2) a preprogrammed
telephone number is dialed, or (3) the inter-digit timer expires.
Overlap: The PBX sends dialed digits one at a time.
180 PC Programming Manual