10-2] Dil Table & Port Settings - Panasonic KX-TDA50 Pc Programming Manual

Value Range
KX-TDA50/KX-TDA100/KX-TDA200:
1–64
KX-TDA600:
1–96
Maintenance Console Location
2.17.1 [10-1] CO Line Settings
Programming Manual References
None
Feature Manual References
1.7.1 GROUP FEATURES
2.17.2 [10-2] DIL Table & Port Settings
Direct In Line (DIL) or Direct Inward Dialing (DID) can be selected for each CO line as the method of
distributing incoming CO line calls to certain destinations. For each CO line to which DIL distribution
is set, different destinations can be programmed depending on the time mode (day/lunch/break/
night). If desired, Calling Line Identification (CLI) distribution can be used in conjunction with DIL
distribution.
For KX-TDA600, all supported cards are displayed in the Select Shelf & Slot list with their shelf and
slot numbers. Select the card to program, or select "All" to display all matching cards.
DID distribution is only available for the KX-TDA100, KX-TDA200 and KX-TDA600.
DIL
For each CO line to which DIL distribution is set, different DIL destinations can be programmed
depending on the time mode (day/lunch/break/night). Generally, DIL distribution is used for CO line
calls from analog CO lines. Tenant number and VM trunk group number can also be programmed for
each CO line.
To assign DIL destination numbers, enter directly or click Destination Setting (see 2.1.6 Extension
Number Setting).
Shelf (KX-TDA600 only)
Indicates the shelf position (reference only).
Default
Current shelf number
Value Range
Shelf number
Maintenance Console Location
2.17.2 [10-2] DIL Table & Port Settings
2.17 [10] CO & Incoming Call
PC Programming Manual 637