Panasonic KX-TDA50 Pc Programming Manual page 425

Feature Manual References
None
Extension Name
Specifies the name of the extension.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.11.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Wireless XDP
Specifies the extension number of the PS with which Wireless XDP Parallel Mode is established. To
enable Wireless XDP Parallel Mode, the PS must be turned off once and then turned on after
assigning this setting.
This setting is not available when the software is in Batch mode. In addition, a PS with PDN or SDN
buttons cannot be used for Wireless XDP Parallel Mode.
When changing the port type of an extension port in DPT Type—Type on the 2.8.5 [1-1] Slot—Port
Property - Extension Port screen, the Wireless XDP setting must be deleted first.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.11.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.5 [1-1] Slot—Port Property - Extension Port—DPT Type—Type
Feature Manual References
1.20.4 Wireless XDP Parallel Mode
2.11 [4] Extension
PC Programming Manual 425