Panasonic KX-TDA50 Pc Programming Manual page 138

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA50:
Table of Contents

Advertisement

2.8 [1] Configuration
Feature Manual References
None
Port Type
Selects the port type.
Notes
Each ISDN connection in a QSIG network must have a master port on one PBX and a slave
port on another PBX.
ISDN extensions can belong to an incoming call distribution group or idle extension hunting
group. In this case, an MSN can be assigned.
Default
CO
Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Maintenance Console Location
2.8.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.9.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
1.13.18 PRIVATE NETWORK FEATURES—QSIG
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
Click the desired cell in the column.
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
138
PC Programming Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda100Kx-tda200Kx-tda600

Table of Contents