Panasonic KX-TDA50 Pc Programming Manual page 110

2.8 [1] Configuration
High Speed Pulse Dial—Break Width
Specifies the maximum length of the break signal in a high speed pulse dial. High Speed Pulse
Dial—Pulse % Break on this screen determines the value that can be specified here.
Default
32 ms
Value Range
4 × n (n=4–18) ms
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
2.8.11 [1-1] Slot—Port Property - LCO Port
Feature Manual References
None
High Speed Pulse Dial—Make Width
Specifies the minimum length of the make signal in a high speed pulse dial. High Speed Pulse Dial—
Pulse % Break on this screen determines the value that can be specified here.
Default
20 ms
Value Range
4 × n (n=3–15) ms
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
2.8.11 [1-1] Slot—Port Property - LCO Port
Feature Manual References
None
Pulse Type
Selects the type of pulse dial transmission appropriate to your area.
Default
Normal
110 PC Programming Manual