2.6 Utility
Item
PS No.
Extension Number
Location—Slot
Location—Port
To view PS information
1.
From the Utility menu, select PS Information.
2.
Click Refresh.
2.6.16 Utility—Timed Update (KX-TDA100/KX-TDA200/KX-
TDA600 only)
Updates programs in the LPR cards (optional service cards with local processors) by comparing them
with files found on the SD memory card on a preset schedule, and downloading newer files to the
cards.
This option is only available at Installer level.
It is recommended to set the timed update to take place during the least active time period, for
example late at night.
Cards are automatically set to OUS status during an update, and returned to INS status when the
update is complete.
This utility does not apply to CS programs. These must be updated manually using the SD Card File
View and Load utility (see 2.6.4 Utility—SD Card File View and Load).
When this utility has been set, all commands that would affect the status of cards are prevented from
operating.
The list of these commands is as follows:
•
Card status change (INS/OUS)
•
Diagnosis commands
•
Card installation
•
Card deletion
•
Remote reset
•
LPR program download requests
•
Signaling Bit Monitor requests (T1)
•
Line trace start requests (T1)
•
ISDN/QSIG Protocol Data Trace start requests
•
Time setting
•
CS program download requests
•
File deletion
When a function other than those listed above, that cannot be performed while Timed Update has
been set, is selected, an error message will be displayed.
62
PC Programming Manual
Description
PS location number.
Only registered PSs will be displayed.
Extension number of the PS.
Slot number of the CS that the PS is registered with.
Port number of the CS that the PS is registered with.