Panasonic KX-TDA50 Pc Programming Manual page 622

2.15 [8] ARS
Value Range
Max. 32 digits (consisting of 0–9, *, #, and P [Pause])
Maintenance Console Location
2.15.6 [8-5] Carrier
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
TRG 01–TRG 64 (KX-TDA50/KX-TDA100/KX-TDA200), or TRG 01–TRG 96
(KX-TDA600)
Selects the trunk groups that connect to the carrier.
TRG 01–TRG 64 (KX-TDA50/KX-TDA100/KX-TDA200), or TRG 01–TRG 96
(KX-TDA600)
Enables each trunk group for each carrier. If a cell is highlighted in blue, that trunk group is enabled
for use with that carrier.
Default
Trunk groups 01–04: ON
All other trunk groups: OFF
Value Range
OFF (white), ON (blue)
Maintenance Console Location
2.15.6 [8-5] Carrier
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
Authorization Code for Tenant
Specifies an Authorization code for each tenant. The Authorization codes can be added to the user-
dialed number by specifying "A" command in Modify Command on the Carrier tab.
Authorization Code for Tenant—Tenant 1–Tenant 32
Specifies the Authorization code of each carrier for each tenant.
Note
For the KX-TDA50/KX-TDA100/KX-TDA200, only up to 8 tenants are available.
622 PC Programming Manual