11-3] Power Failure Transfer (Kx-Tda100/Kx-Tda200/Kx-Tda600 Only) - Panasonic KX-TDA50 Pc Programming Manual

2.18 [11] Maintenance
Maintenance Console Location
2.18.2 [11-2] PT Programming Access
Programming Manual References
None
Feature Manual References
1.13.28 PT Programming
PROG**
Selects whether User Level PT users can access each system programming item.
Default
000–009, 020–099: Enable
010–019, 100–999: Disable
Value Range
Disable, Enable
Maintenance Console Location
2.18.2 [11-2] PT Programming Access
Programming Manual References
None
Feature Manual References
1.13.28 PT Programming
2.18.3 [11-3] Power Failure Transfer (KX-TDA100/KX-TDA200/KX-
TDA600 only)
When the power supply to the PBX fails, power failure transfer (PFT) switches the current connections
to Auxiliary Connections, so that certain SLTs and CO lines can be connected. Auxiliary Connections
allow CO line calls to be made during a power failure. Up to 6 pairs of CO line cards and extension
cards that are physically connected by RJ11 cable can be specified. The conversations through the
lines specified here will be maintained even when the power returns.
For the KX-TDA600, select the shelf for which to set connections from the Shelf list. Note that PFT
connections can only be made within the same shelf.
Trunk Card Slot No.
Specifies the position of the CO line card to be used.
Default
Current slot number
676 PC Programming Manual