6-7] Dialing Plan - Panasonic KX-TDA50 Programming Manual

2.12 [6] Feature
Value Range
For KX-TDA50:
Basic Memory: PBX basic system speed dialing numbers are used.
Expanded Memory: Expansion system speed dialing numbers are used.
For KX-TDA100/KX-TDA200/KX-TDA600:
Same as System Setting: PBX common system speed dialing numbers are used.
Tenant Exclusive: Individual tenant system speed dialing numbers are used.
Maintenance Console Location
2.12.6 [6-6] Tenant
Programming Manual References
2.12.1 [6-1] System Speed Dial
Feature Manual References
1.16.4 Speed Dialing, System
1.17.3 Tenant Service

2.12.7 [6-7] Dialing Plan

The PBX sends all of the dialed digits at once after an extension user completes dialing. The PBX
can recognize the end of dialing when the dialed telephone number starts with the programmed
leading number and contains the programmed total number of digits.
When the PBX recognizes the end of dialing to an analog CO line, the PBX cancels the muting of the
caller's voice sent to the analog CO line immediately. If the PBX cannot recognize the end of dialing,
the PBX mutes the caller's voice sent to an analog CO line from the time at which the last digit is
dialed until the analog CO line inter-digit timer expires.
4 tables can be programmed, each with a maximum of 50 leading numbers. The leading number table
used with each trunk group can be specified in Dialing Plan Table in 2.9.1 [3-1-1] Trunk Group—
TRG Settings. Select the table to program from the Dialing Plan Table list.
To assign a set of leading numbers automatically, click Auto Assign.
Leading Number
Specifies the leading number to be regarded as the beginning of dialing.
Default
No. 1 in Dialing Plan Table 1: N11
No. 2 in Dialing Plan Table 1: NXX NXX XXXX
No. 3 in Dialing Plan Table 1: 1NXX NXX XXXX
Others: Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, N [2,3,4,5,6,7,8,9], P [0, 1], and X [0-9, *, and #])
Maintenance Console Location
2.12.7 [6-7] Dialing Plan
568 PC Programming Manual