Card Status; Display Options - Panasonic KX-TDA50 Pc Programming Manual

2.1.5 Display Options

6.
Main Screen
Displays the screens selected from 4. System Menu above.
For details, see Section 3 [1] Configuration to Section 13 [11] Maintenance.
Standard Buttons and Elements
There are several standard buttons that are displayed on many screens within the Maintenance Console.
The standard buttons are as follows:
Button
OK
Cancel
Close
Apply
Refresh
Help
In addition, many screens within the software display a small open folder icon (
items. Clicking this icon will collapse part of the list, allowing other items to be displayed. The icon will change
to a closed folder (
Clicking the closed folder icon will expand the list again.

2.1.4 Card Status

Certain tools, utilities and settings require that the target card be set to out-of-service (OUS) or in-service (INS)
status before the operation is carried out. Where required, this is noted in the description of each item. Card
status changes can only be performed when the software is in Interactive mode (see 2.1.1 Starting
Maintenance Console and Software Modes).
•
"In service" means that the card is installed correctly in the PBX, and is capable of being used normally.
•
"Out of service" means that the card is installed correctly in the PBX, but has been temporarily removed
from use. This allows settings to be modified or software to be upgraded.
•
"Fault" means that the card is not installed in the PBX correctly, or is not functioning correctly. For more
information, see the Installation Manual.
For details about how to change the status of a card, see To change the status (INS/OUS) of a card
(Interactive mode only) on screen 3.1 [1-1] Slot.
2.1.5 Display Options
The View and Window menus provide options to control the display of items within the Maintenance Console.
•
View
–
Toolbar: Displays or hides the tool bar of commonly used buttons.
–
Statusbar: Displays or hides the bar at the bottom of the Maintenance Console window.
–
System Menu: Displays or hides the menu of PBX setting screens.
•
Window
24 PC Programming Manual
Function
Implements changes and closes the current screen.
Abandons changes and returns to the previous screen.
Keeps any changes implemented, and closes the current screen.
Implements changes and remains on the same screen.
Implements changes, updates displayed data, and remains on the
current screen.
Displays the relevant help topic for the current screen.
).
) beside lists of setting
Document Version 2010-11