Repair Instructions; Heat Exchanger Components - Suzuki Swift Sport 2004 Service & Repair Manual

6) Start engine and warm engine up to normal
operating temperature.
NOTE
Be sure to shift transaxle gear shift lever in
"Neutral" (shift select lever in "P" range for
A/T vehicle), set parking brake and block
drive wheels.
7) After warming up, raise engine speed to 4,000 r/min.
and measure oil pressure.
Oil pressure specification
More than 270 kPa (2.7 kg/cm
r/min. (rpm)
8) After checking oil pressure, stop engine and remove
oil pressure gauge and attachment.
9) Before reinstalling oil pressure switch (2), be sure to
wrap its screw threads with sealing tape (1) and
tighten switch to specified torque.
NOTE
If sealing tape edge is bulged out from screw
threads of switch, cut it off.
Tightening torque
Oil pressure switch (a): 13 N·m (1.3 kgf-m, 9.5
lb-ft)

Heat Exchanger Components

1. Heat exchanger inlet No. 1 hose
2. Heat exchanger outlet No. 1 hose
3. Heat exchanger
2 , 39.8 psi) at 4,000

Repair Instructions

6
4. Gasket
5. Heat exchanger stand bolt
6. Oil filter adapter case
Engine Lubrication System:
10) Start engine and check oil pressure switch for oil
leakage. If oil leakage is found, repair it.
11) Connect oil pressure switch coupler (1).
1
7
I2RH0B150005-01
I2RH0B150006-01
S7RS0B1506001
2
3
4
5
I6RS0B151001-02
7. O-ring
: Apply engine oil.
: 22 N⋅m (2.2 kgf-m, 16.0 lb-ft)
: Do not reuse.
1E-3
(a)