Suzuki Swift Sport 2004 Service & Repair Manual page 358

1E-6 Engine Lubrication System:
Installation
1) Install new O-rings (2) in the position as shown in
figure and install oil pump strainer (1).
Tighten strainer bolt (3) first and then bracket bolt (4)
to specified torque.
Tightening torque
Oil pump strainer bolt (a): 11 N·m (1.1 kgf-m, 8.0
lb-ft)
Oil pump strainer bracket bolt (b): 11 N·m (1.1
kgf-m, 8.0 lb-ft)
2) Install dowel pin (1) to oil pan.
3) Apply sealant continuously to oil pan mating surface
as shown in figure.
"A": Sealant 99000–31260 (SUZUKI Bond
No.1217G)
Sealant amount for oil pan
Width "a": 3 mm (0.12 in.)
Height "b": 2 mm (0.08 in.)
I2RH0B150012-01
4) Install oil pan to cylinder block temporarily.
5) Insert dowel pin (1) in hole (2) of oil pan in order to
locate oil pan precisely.
NOTE
Dowel pin is available as a spare part (part
number: 04211–13189).
I4RS0A150005-01
I4RS0A150006-01
2
1
I4RS0A150007-01