Swingarm Related Parts Inspection - Suzuki 2005 GSF1200 Service Manual

2C-9 Rear Suspension:
• Tighten the cushion lever, cushion rod lower and rear
shock absorber lower mounting nut to the specified
torque.
Tightening torque
Cushion rod mounting nut (a): 78 N·m (7.8 kgf-m,
56.5 lb-ft)
Cushion lever mounting nut (b): 78 N·m (7.8 kgf-
m, 56.5 lb-ft)
Rear shock absorber mounting nut (c): 50 N·m (
5.0 kgf-m, 36.0 lb-ft)
(b)
• Tighten the rear shock absorber upper mounting nut
to the specified torque.
Tightening torque
Rear shock absorber mounting nut (c): 50 N·m (
5.0 kgf-m, 36.0 lb-ft)
(c)
(c)
(a)
I649G1230027-02
I649G1230028-03

Swingarm Related Parts Inspection

Refer to "Swingarm / Cushion Rod Removal and
Installation: ".
Spacers
1) Remove the spacers from the swingarm.
2) Inspect the spacers for wear and damage. If any
defects are found, replace the spacers with new
ones.
Chain Buffer
Inspect the chain buffer for wear and damage. If any
defect is found, replace the chain buffer with a new one.
Swingarm Bearing and Cushion Rod Bearing
1) Insert the spacers into bearings.
2) Check the play by moving the spacers up and down.
If excessive play is noted, replace the bearing with a
new one. Refer to "Swingarm Bearing Removal and
Installation: ".
B649G12306017
I649G1230029-01
I649G1230030-01
I649G1230031-01